ProductPromotion
Logo

Lua

made by https://0x3d.site

GitHub - brimworks/lua-zip: Lua binding to libzip.
Lua binding to libzip. Contribute to brimworks/lua-zip development by creating an account on GitHub.
Visit Site

GitHub - brimworks/lua-zip: Lua binding to libzip.

GitHub - brimworks/lua-zip: Lua binding to libzip.


  • Author : Brian Maher
  • Library : lua_zip - Lua 5.1 interface to libzip
  • The MIT License
  • Copyright (c) 2009 Brian Maher
  • Permission is hereby granted, free of charge, to any person obtaining a copy
  • of this software and associated documentation files (the "Software"), to deal
  • in the Software without restriction, including without limitation the rights
  • to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
  • copies of the Software, and to permit persons to whom the Software is
  • furnished to do so, subject to the following conditions:
  • The above copyright notice and this permission notice shall be included in
  • all copies or substantial portions of the Software.
  • THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
  • IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
  • FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
  • AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
  • LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
  • OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
  • THE SOFTWARE.

To use this library, you need libzip, get it here: http://www.nih.at/libzip/

To build this library, you need CMake, get it here: http://www.cmake.org/cmake/resources/software.html

Loading the library:

If you built the library as a loadable package
    [local] zip = require 'brimworks.zip'

If you compiled the package statically into your application, call
the function "luaopen_brimworks_zip(L)". It will create a table
with the zip functions and leave it on the stack.

Note:

There is not a "streaming" interface supplied by this library.  If
you want to work with zip files as streams, please see
lua-archive.  However, libarchive is currently not compatible with
"office open xml", and therefore the author was motivated to write
this zip specific binding.

Why brimworks prefix?

When this module was created, there was already a binding to
zziplib named "zip" and since the author owns the brimworks.com
domain he felt prefixing with brimworks would avoid in collisions
in case people need to use the zziplib binding at the same time.

-- zip functions --

zip.CREATE zip.EXCL zip.CHECKCONS

Numbers that represent open "flags", see zip.open().

zip.FL_NOCASE zip.FL_NODIR

Numbers that represent locate "flags", see zip_arc:name_locate().

zip.FL_COMPRESSED zip.FL_UNCHANGED

Numbers that represent fopen "flags", see zip_arc:open().

flags = zip.OR(flag1[, flag2[, flag3 ...]])

Perform a bitwise or on all the flags.

local zip_arc = zip.open(filename [, flags])

Open a zip archive optionally specifying a bitwise or of any of
these flags:

    zip.CREATE
        Create the archive if it does not exist.

    zip.EXCL
        Error if archive already exists.

    zip.CHECKCONS
        Perform additional consistency checks on the archive, and
        error if they fail.

If an error occurs, returns nil plus an error message.

zip_arc:close()

If any files within were changed, those changes are written to
disk first. If writing changes fails, zip_arc:close() fails and
archive is left unchanged. If archive contains no files, the file
is completely removed (no empty archive is written). 

Unlike the other functions, this function will "throw" an error if
there is any failure.  The reason to be different is that it is
easy to forget to check if close is successful, and a failure to
close is truely an exceptional event.

NOTE: If a zip_arc object is garbage collected without having
called close(), then the memory associated with that object will
be free'ed, but changes made to the archive are not committed.

local last_file_idx = zip_arc:get_num_files() local last_file_idx = #zip_arc

Return the number of files in this zip archive, and since the
index is one based, it also is the last file index.

local file_idx = zip_arc:name_locate(filename [, flags])

Returns the 1 based index for this file.  The flags argument may
be a bitwise or of these flags:

    zip.FL_NOCASE
        Ignore case distinctions.

    zip.FL_NODIR
        Ignore directory part of file name in archive.

If it is not found, it returns nil plus an error message.

local file = zip_arc:open(filename | file_idx [, flags])

Returns a new file handle for the specified filename or file
index.  The flags argument may be a bitwise or of these flags:

    zip.FL_COMPRESSED
        Read the compressed data. Otherwise the data is
        uncompressed by file:read().

    zip.FL_UNCHANGED
        Read the original data from the zip archive, ignoring any
        changes made to the file.

    zip.FL_NOCASE
    zip.FL_NODIR
        See zip_arc:name_locate().

Note that this file handle can only be used for reading purposes.

file:close()

Close a file handle opened by zip_arc:open()

local str = file:read(num)

Read at most num characters from the file handle.

local stat = zip_arc:stat(filename | file_idx [, flags])

Obtain information about the specified filename or file index.
The flags may be a bitwise or of these flags:

    zip.FL_UNCHANGED
        See zip_arc:open().

    zip.FL_NOCASE
    zip.FL_NODIR
        See zip_arc:name_locate().

The returned stat table contains the following fields:

    stat.name              = name of the file
    stat.index             = index within archive
    stat.crc               = crc of file data
    stat.size              = size of file (uncompressed)
    stat.mtime             = modification time
    stat.comp_size         = size of file (compressed)
    stat.comp_method       = compression method used
    stat.encryption_method = encryption method used

If an error occurs, this function returns nil and an error
message.

local filename = zip_arc:get_name(file_idx [, flags])

Returns the name of the file at the specified file index.  The
only valid flag is:

    zip.FL_UNCHANGED
        See zip_arc:open().

local comment = zip_arc:get_archive_comment([flags])

Return any comment contained in the archive.  The only valid flag
is:

    zip.FL_UNCHANGED
        See zip_arc:open().

zip_arc:set_archive_comment(comment)

Sets the comment of an archive.  May throw an error if the comment
exceeds 65,535 bytes.

local comment = zip_arc:get_file_comment(file_idx [, flags])

Return any comment about the specified file.  The only valid flag
is:

    zip.FL_UNCHANGED
        See zip_arc:open().

zip_arc:set_file_comment(file_idx, comment)

Set the comment for a specified file index within the archive.
Throws an error if input is invalid.

zip_arc:add_dir(dirname)

Creates a new directory within the archive.  May throw an error if
an entry already exists in the archive with that name or input is
invalid.

file_idx = zip_arc:add(filename, ...zip_source)

Adds the specified filename to the archive from the specified
"...zip_source" (see below).

If an error occurs, throws an error.

file_idx = zip_arc:replace(file_idx, ...zip_source)

Replaces the specified file index with a new "...zip_source"
(see below).

If an error occurs, throws an error.

zip_arc:rename(filename | file_idx, new_filename)

Rename the specified file in the archive.  May throw an error if
the entry being renamed does not exist.

zip_arc:delete(filename | file_idx)

Delete the specified file from the archive.  May throw an error if
the specified filename or file index does not exist.

..zip_source = "string", str

The source to use will come from the specified string.

...zip_source = "zip", other_zip_arc, file_idx[, flags[, start[, len]]])

The "...zip_source" is an archive and file index into that archive
along with an optional flag, start file offset and length.  The
flags are an optional bitwise or of:

    zip.FL_UNCHANGED
        See zip_arc:open().

    zip.FL_RECOMPRESS
        When adding the data from srcarchive, re-compress it using
        the current settings instead of copying the compressed
        data.

Circular zip source references are not allowed.  For example, if
you add a file from ar2 into ar1, then you can't add a file from
ar1 to ar2.  Here is an example of this error:

    ar1:add("filename.txt", "zip", ar2, 1)
    ar2:add("filename.txt", "zip", ar1, 1) -- ERROR!

...zip_source = "file", filename[, start[, len]]

Create a "zip_source" from a file on disk.  Opens filename and
reads len bytes from offset start from it. If len is 0 or -1, the
whole file (starting from start) is used.

###################################################################### TODO: The following functions are not implemented yet: ######################################################################

...zip_source = "object", obj

The "...zip_source" is an object with any of these methods:

    success = obj:open()
        Prepare for reading. Return true on success, nil on
        error.

    str = obj:read(len)
        Read len bytes, returning it as a string.  Return nil on
        error.

    obj:close()
        Reading is done.

    stat = obj:stat()
        Get meta information for the input data.  See
        zip_arc:stat() for the table of fields that may be set.
        Usually, for uncompressed data, only the mtime and size
        fields will need to be set.

    libzip_err, system_err = obj:error()
        Get error information.  Must return two integers whic
        correspond to the libzip error code and system error code
        for any error (see above functions that may cause errors)

More Resources
to explore the angular.

mail [email protected] to add your project or resources here 🔥.

Related Articles
to learn about angular.

FAQ's
to learn more about Angular JS.

mail [email protected] to add more queries here 🔍.

More Sites
to check out once you're finished browsing here.

0x3d
https://www.0x3d.site/
0x3d is designed for aggregating information.
NodeJS
https://nodejs.0x3d.site/
NodeJS Online Directory
Cross Platform
https://cross-platform.0x3d.site/
Cross Platform Online Directory
Open Source
https://open-source.0x3d.site/
Open Source Online Directory
Analytics
https://analytics.0x3d.site/
Analytics Online Directory
JavaScript
https://javascript.0x3d.site/
JavaScript Online Directory
GoLang
https://golang.0x3d.site/
GoLang Online Directory
Python
https://python.0x3d.site/
Python Online Directory
Swift
https://swift.0x3d.site/
Swift Online Directory
Rust
https://rust.0x3d.site/
Rust Online Directory
Scala
https://scala.0x3d.site/
Scala Online Directory
Ruby
https://ruby.0x3d.site/
Ruby Online Directory
Clojure
https://clojure.0x3d.site/
Clojure Online Directory
Elixir
https://elixir.0x3d.site/
Elixir Online Directory
Elm
https://elm.0x3d.site/
Elm Online Directory
Lua
https://lua.0x3d.site/
Lua Online Directory
C Programming
https://c-programming.0x3d.site/
C Programming Online Directory
C++ Programming
https://cpp-programming.0x3d.site/
C++ Programming Online Directory
R Programming
https://r-programming.0x3d.site/
R Programming Online Directory
Perl
https://perl.0x3d.site/
Perl Online Directory
Java
https://java.0x3d.site/
Java Online Directory
Kotlin
https://kotlin.0x3d.site/
Kotlin Online Directory
PHP
https://php.0x3d.site/
PHP Online Directory
React JS
https://react.0x3d.site/
React JS Online Directory
Angular
https://angular.0x3d.site/
Angular JS Online Directory